Learning Tower Plans

Julian 0 FavoriteLoadingAdd to favorites List YOUR FAVORITES GapDice RANDOM PLAN

This step by step diy woodworking project is about learning tower plans. If you want to learn more about building a learning tower, we recommend you to pay attention to the instructions described in the article. There are many other designs and plans to choose from when building projects for your backyard, so make sure you take a close look over the related plans that are featured on our site.

There are many plans and designs to choose from, so make sure you take a close look over the rest of the chair plans featured on our website. Plan everything with attention and adjust the size and the shape of the learning tower to suit your needs. Plumb the legs and make sure the corners are right-angled before inserting the galvanized screws into place. Drill pilot or pocket holes to prevent the wood from splitting.

 

 

Projects made from these plans

Add-image

 

 

Learning tower plans

Building a learning tower

Building a learning tower

 

  • A – 4 pieces of 2×2 lumber – 36″ long LEGS
  • B – 4 pieces of 1×6 lumber – 15″ long SIDES
  • C – 6 pieces of 1×6 lumber – 15″ long SIDES
  • D – 8 pieces of 2×2 lumber – 15″ long, 2 pieces – 15″ long SUPPORTS
  • E – 2 pieces of 1×8 lumber – 18″ long BOTTOM          

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Post hole digger, Concrete mixer

 Safety Gloves, Safety Glasses

 One day

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a learning tower

Building the faces of the learning tower

Building the faces of the learning tower

The first step of the learning tower is to build the sides of the learning tower. In order to get a professional result, we recommend you to build the legs and the bottom supports out of 2×2 lumber. In addition, use 1×6 slats to build the rails, making sure you pay attention to the diagram.

Drill pocket holes at both ends of the horizontal components and secure them to the legs using screws. Make sure the corners are right-angled and add glue to enhance the bond of the joints.

Fitting the side components

Fitting the side components

Continue the project by locking the sides of the learning tower together. Cut the components out of 1×6 lumber and 2×2 lumber. Drill pocket holes at both ends and secure them to the legs using screws and waterproof glue.

Check if the corners are square and pay attention to the details described in the diagram. Use a jigsaw to make the curved cuts and smooth the edges using a sandpaper.

Fitting the bottom slats

Fitting the bottom slats

In order to get the job done in a professional result, we recommend you to attach the 1×8 slats to the supports. As you can easily notice in the image, you can adjust the height at which you place the bottom slats, by setting them to the 2×2 supports.

Learning tower plans

Learning tower plans

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.

Top Tip: If you want to enhance the look of the woodworking project and to protect the learning tower from decay, we recommend you to cover the components with paint or stain. Place the chair in a proper location and move it whenever necessary.

 

 

This woodworking project was about learning tower plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects.












Top-Bar
Kids                Garden                Animals                 Planter

Car                Indoor               Furniture               Shed




Your-comment