Home Furniture DIY Plant Stand Plans

DIY Plant Stand Plans

by Ovidiu

 

This step by step diy woodworking project is about diy plant stand plans. I have designed this 3 tier wood plant stand so you can keep your flower pots organized. You can make this stand in less than one day and spend under 15 $. There are many other designs and plans to choose from when building projects for your backyard, so make sure you take a close look over the related plans that are featured on our site.

There are many plans and designs to choose from, so make sure you take a close look over the rest of the table plans featured on our website. Plan everything with attention and adjust the size and the shape of the project to suit your needs. Plumb the legs and make sure the corners are right-angled before inserting the galvanized screws into place. Drill pilot or pocket holes to prevent the wood from splitting. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

 

Building a plant stand

Building a plant stand

Building a plant stand

 

Cut & Shopping Lists

  • A – 4 pieces of 1×2 lumber – 32″ long LEGS
  • B – 6 pieces of 1×2 lumber – 12″ long BRACES
  • C – 4 pieces of 1×2 lumber – 25″ long, 2 pieces – 15″ long TRIMS
  • D – 13 pieces of 1×3 lumber – 13 1/2″ long TABLETOP

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

DIY Plant Stand Plans

Assembling the sides for the plant stand

Assembling the sides for the plant stand

The first step of the project is to assemble the sides for the plant stand. In order to get a professional result, I recommend you to take accurate measurement and to use a good saw. Smooth the edges before locking the components together tightly.

Dill pilot holes through the horizontal supports, align the slats making sure the edges are flush and check if the corners are square. Next, insert the 1 1/4″ screws and add glue to the joints.

Assembling the stand

Assembling the stand

Assemble, the opposite side of the plant stand, as well. You should also remember that you can adjust the size of the plant stand to suit your needs. You can make the supports wider, narrower or even taller. You can add 2 tiers or more than 4. It is a matter of personal taste and of needs.

Building the braces

Building the braces

Next, you need to build the braces for the shelves. Use a jigsaw to round the ends of the supports and smooth everything with 120-grit sandpaper.

Attaching the braces

Attaching the braces

Clamp the braces to the two sides of the plant stand, as shown in the diagram. Use a spirit level to make sure the braces are perfectly horizontal. In addition, drill pilot holes through the supports and insert 1 1/4″ screws into the legs.

Fitting the shelves

Fitting the shelves

On of the last steps of the project is to attach the 1×3 slats to the supports. Drill pilot holes through the slats and insert 1 1/4″ screws into the braces. Place a scrap piece of 1/4″ plywood between the slats, so you can create even gaps between the components.

DIY Plant Stand Plans

DIY Plant Stand Plans

This 3 tier plant stand can be used both inside your home or on the patio, as it features a modern design and it has compact dimensions. If you need more shelves for your flowers, you can easily add them to the structure.

Fill the rest of the holes or dents with wood putty. After it dries out, smooth everything with 120-220 grit sandpaper and apply the primer. Last but not least apply the coats of paint to enhance the look of the project and to protect it from decay.

How to make a plant stand

How to make a plant stand

This is a great one day project that will add character to your patio or to your balcony. You can even add wine supports to the legs so you can make the most of the space. The list of possibilities is endless and it is only limited by your imagination.

 

 

This woodworking project was about diy 3 tier plant stand plans. If you want to see more outdoor plans, I recommend you to check out the rest of my step by step projects. LIKE me on Facebook and Google + to be the first that gets my latest projects.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

10 comments

Dorothy -

on this plant stand the legs should be 32″ long instead of 20″ as you have in your instructions. I’m so glad I caught this before I cut My boards because I would have been very disappointed in how it would have came out. Just an honest mistake but should be corrected . I love your site and all the patterns you have. I have made a few of them so far and plan on making more to come .Thank you for this site.

Reply
Jack -

Thanks for the feedback. I would love to see and feature your projects on the blog. You can send me the pics at: http://myoutdoorplans.com/contact/

Reply
Geoff -

I’m pretty bummed I wasted my time and money on hardwood for this. the measurements are all wrong. how do you fit 5, 3″ wide boards across 13.5 inches on the top? or 4, 3″ wide boards across 10.5 inches on the sides? even the legs are the wrong measurement. i wish i caught these errors before I started it.

Reply
Jack -

I am pretty bummed when people like you make accusations on my site regarding my free plans, when they clearly have nothing to do with woodworking or with common sense. The plans are flawless. A 1×3 board is not 1″x3″, it is 3/4″x2 1/2″. You can check this table for your woodworking 101: http://myoutdoorplans.com/imperial-to-metric-conversion/

Reply
rob -

This comment doesn’t even make sense.

Reply
Geoff -

there’s the discrepancy. thanks.

Reply
Dustin -

I think it is a good website because i understand what to do

Reply
Ovidiu -

That’s great. Looking forward to seeing your future projects.

Reply
John L -

Why must I use the PDF software on the screen to download plans. I have my own PDF app installed.

Reply
Ovidiu -

You don’t need to install anything. Just read the FAQs: http://myoutdoorplans.com/faq/

Reply

Leave a Reply to Dustin Cancel Reply