Home 12x20 Flat Roof Carport Plans

Flat Roof Carport Plans

by Ovidiu

 

This step by step diy woodworking project is about flat roof carport plans. The project features instructions for building a single car carport made from wood. If you want to protect your car from bad weather, but a garage is too expensive or just too complex for your needs, building this carport with a modern design is a great option. Make sure you check out the rest of plans to see alternatives and more projects for your garden.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

Flat Roof Carport Plans

Building-a-free-standing-carport

Building-a-free-standing-carport

 

Cut & Shopping Lists

  • A – 2 pieces of 4×4 lumber – 132″ long, 2 pieces – 140 1/4″ long, 2 pieces – 148 1/2″ long POSTS
  • B – 4 pieces of 2×6 lumber – 265 3/4″ long BEAMS
  • C – 2 pieces of 4×4 lumber – 42 1/2″ long, 2 pieces – 47 1/2″ long, 2 pieces – 55″ long, 2 pieces – 59″ long BRACES
  • D – 12 pieces of 2×4 lumber – 140″ long RAFTERS
  • E – 4 pieces of 3/4″ plywood- 48″x96 long, 1 piece – 73 3/4″x96″ long, 1 piece – 24″x48″ long, 1 piece – 49 3/4″x48″ long, 1 piece – 44″x73 3/4″ long, 2 pieces – 44″x96″ long ROOF
  • F – 280 sq ft of tar paper, 280 sq ft of asphalt shingles ROOFING
  • G – 2 pieces of 1×4 lumber – 140″ long, 2 pieces – 265 3/4″ long TRIMS
  • H – 2 pieces of 1×6 lumber – 141 1/2″ long TRIMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One weekend

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a free standing wooden carport

Laying-out-the-carport

Laying-out-the-carport

The first step of the project is to layout the posts in a professional manner. Therefore, I recommend you to use batter boards (made from 2x4s) and string. Measure the diagonals and make adjustments until they are perfectly equal. Apply the 3-4-5 rule to the corners to make sure they are right-angled.

Building the posts

Building the posts

Build the posts from 4×4 lumber. As you can easily notice in the diagram, you need to set the posts in concrete for 36″. Make sure you make 4 degree cuts to the top of the posts, for a professional result.

Anchoring the posts of the anchor

Anchoring the posts of the anchor

There are several ways to lock the posts into place. Therefore, you could dig holes in the ground and set the posts into concrete, or you could use post anchors. Nevertheless, taking into account the height of the construction, we recommend you to lock the posts into concrete.

Installing the post

Installing the post

Level the posts with a spirit level and secure them temporarily with 2×4 braces. Make sure the top of the posts are at the same level, otherwise the structure of the carport won’t be sturdy enough.

Attaching-the-support-beams

Attaching-the-support-beams

After the concrete sets out, you need to attach the 2×6 support beams to the top of the posts, as shown in the diagram. Align the beams with attention and clamp them to the posts tightly.

Secuting the support beams to the posts

Securing the support beams to the posts

Drill pilot holes through both the beams and through the posts. Next, insert 7″ carriage bolts to lock the beams to the top of the posts.

Building the braces

Building the braces

Build the braces for the carport from 4×4 lumber. Cut both ends of the braces at 45 degrees. Smooth the cut edges with sandpaper.

Fitting the braces

Fitting the braces

Fit the braces to the sides of the carport. Align the edges with attention, drill pilot holes and use 3 1/2″ screws to lock them into place.

Building the rafters

Building the rafters

Build the rafters from 2×4 lumber. As you can easily notice in the diagram, you need to make notches to the rafters. Use a circular saw to make parallel cuts to the marked areas and remove the excess material with a chisel.

Fitting-the-rafters

Fitting-the-rafters

Fit the rafters to the support beams and place the equally-spaced. Use metal connectors to lock the rafters to the support beams.

Attaching the roofing sheets

Attaching the roofing sheets

Build the roof of the carport from 3/4″ plywood. Cut the sheets at the right dimensions and place them to the rafters. Use 1 5/8″ screws to secure the sheets into place, every 8″. Leave no gaps between the sheets for a professional result.

Fitting the side trims

Fitting the side trims

Attach 1×4 trims to the sides of the rafters. Use brad nails to secure the trims into place.

Fitting the end trims

Fitting the end trims

Next attach the trims to the front and back of the carport. The top trims are made from 1×4 lumber, while the bottom trims are made from 1×6 lumber.

Fitting the roofing

Fitting the roofing

Cover the roof with tar paper. Use staples to secure the tar paper into place. Next, you should install asphalt shingles to the roof, starting from the bottom up to the top. Install a ridge cap to waterproof everything in a professional manner.

Flat Roof Carport Plans

Flat Roof Carport Plans

If you want, you can easily adjust the size of the carport to suit your needs. Fill the holes with wood putty and smooth the surface with sandpaper. Cover the components with paint or stain to protect the components from decay and to enhance the look of the project.

Top Tip: If you live in an area with heavy winters, you should increase the slope of the roof. This carport design is more suitable for area with mild winters.

 

 

This woodworking project was about flat roof carport plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

3 comments

Graham Smith -

What kind of snowload will they handle and wind gusts.

Reply
Ovidiu -

It’s a flat roof, this is not designed for snow at all. If you get snow, you need a roof with a proper pitch.

Reply
Reggie -

Where do i find the drawings for 12 x 40 flat roof carport

Reply

Leave a Comment