Home Brags How to Build a Wishing Well Planter

How to Build a Wishing Well Planter

by Ovidiu

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.

 

 

Wishing Well Planter

Frames

The first step of the project was to assemble the three frames for the base of the planter. I used 1×4 lumber to build the frames. You could drill pocket holes and screws to assemble the components, but I chose to lock them together with nails and waterproof glue.

Attaching-the-bottom

I used a scrap piece of plywood to build the bottom of the planter. Use a water resistant material, if you will keep the component in rain.

Assembling-the-wishing-well

I cut the top of the stakes at 45 degrees, as you can easily notice in the diagram. I clamped the stakes to the base of the planter and used screws to lock them into place tightly.

Attaching-the-stakes

I used a spirit level to make sure the stakes are perfectly vertical.

Building-the-roof-for-the-wishing-well-planter

I built the structure of the roof out of 1×2 lumber. I followed the plans and secure them into place with screws. Last but not least, I attached the 1×16 pieces of lumber to the rafters. I applied translucent wood primer to the components.

Wishing-well-planter

 

From Jack Sander

Quick project for mother’s day. I modified your otherwise excellent plans to build a wooden wishing well planter. I used 1×4 lumber for the base and stakes, as I wanted to get the job done quickly. The trims and roof structure were made out of 1×2 lumber. I use some 1×16 scrap pieces to build the roof sheets of the planter. Pre-drilled hole, added glue and inserted galvanized screws to lock everything together tightly. I still have to apply a few coats of paint over the components and maybe build the spindle. I think that makes for a perfect gift for my mother and I’m looking forward to seeing her reaction.

 

 

From Plans: http://myoutdoorplans.com/planter/wishing-well-planter-plans/

Difficulty Level: medium

Time Required: 1 day

Total Cost: <15 $

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment