DIY Family Room Bar by Ovidiu written by Ovidiu 111  This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor. We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form. DIY Family Room Bar From Jimmie, For this family room bar I used one sheet of sheetrock. The plywood- scrap is underneath the Thick Granite. I also used 1 1/2 and 3 inch deck screws. From Plans: original plans Difficulty Level: medium Time Required: 2 days of slow work Total Cost: 350 $   EXPLORE MORE IDEAS FOR: 0 comment 0 FacebookTwitterPinterestEmail You may also like Large Dog House – DIY Project 12×14 Gable Pavilion – DIY Project 12×16 Free Standing Pergola – DIY Project 6×16 Firewood Shed – DIY Project 12×16 Barn Shed – DIY Project 12×12 Gable Pavilion – DIY Project 12×16 Lean to Addition – DIY Project 10×12 Gable Shed with Porch – DIY Project Double Shooting Bench – DIY Project 12×16 Gambrel Shed with Loft – DIY Project Ovidiu I've been a designer and a woodworker since I first developed consciousness. Leave a Comment Cancel Reply