Fire Pit Bench Plans

Julian September 28, 2013 Comments Off

 

This step by step diy woodworking project is about fire pit bench plans. If you want to learn how to build a simple bench for your backyard patio, we recommend you to pay attention to the instructions described in the article. Plan every step of the project from the very beginning, if you want to keep the costs under control and to save time. Gather all the materials and tools required for the project.

There are a few designs you could choose from when building a backyard bench, so make sure you take a look over the rest of the bench plans. Adjust the size of the bench to suit your needs and make sure you buy the best materials you can afford. Cedar, pine or redwood are excellent choices, as they have a beautiful finish and are highly durable. Always pre-drill the components before inserting the screws, to prevent the wood from splitting.

  • A – 4 pieces of 2×4 lumber – 17″ long LEGS
  • B – 2 pieces of 2×4 lumber – 14 1/2″ long, 2 pieces – 41″ long, 1 piece – 11 1/2″ long FRAME
  • C – 2 pieces of 2×6 – 48″ long, 1 piece – 48″ long SLATS

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Post hole digger, Concrete mixer

 Safety Gloves, Safety Glasses

 One day

 

Fire Pit Bench Plans

Building a firepit bench

Building a fire pit bench

 

Top Tip: Choose the most suitable design for your bench before starting the construction project in your workshop. If necessary, make several adjustments to the bench.

 

Building a firepit bench

Building the legs

Building the legs

The first step of the project is to build the four legs of the firepit bench. As you can easily notice in the plans, we recommend you to use 2×4 lumber for the legs. Mark the cut lines on the pieces of lumber and make the notches with a circular saw.

Top Tip: Make several cuts inside the marked area and remove the excess material with a chisel. Last but not least, smooth the surface with medium-grit sandpaper.

Building the bench frame

Building the bench frame

Continue the woodworking project by building the frame of the seat. In order to get the job done in a professional manner, we recommend you to build the components from 2×4 lumber.

Cut the components at the right size and always drill pilot holes before inserting the screws, to prevent the wood from splitting. Check if the corners are right-angled before inserting the screws.

Attaching the legs

Attaching the legs

 

Attaching the legs to the bench frame is a straight forward job, as it requires basic woodworking skills.

Plumb the legs, align them at both ends and lock them to the frame with galvanized screws. Pre-drill the legs to prevent the wood from splitting.

 

Attaching the seat slats

Attaching the seat slats

Fitting the slats to the frame of the fire pit bench is a quick process, as you just need to adjust the size of the slats and to fit them into place with screws. Drill pocket holes through the slats before inserting the screws, to prevent the wood from splitting.

It is essential to center the slats to the frame, otherwise you won’t get a symmetrical appearance. As you can notice in the plans, we recommend you to use 2×6 and 2×4 slats.

Firepit bench plans

Firepit bench plans

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.

Top Tip: In order to protect the lumber from water damage, we recommend you to cover the components with several coats of paint. Place the porch bench in a proper location and move it whenever necessary.

 

This woodworking project was about fire pit bench plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects.

Comments are closed.


Print This Post Print This Post