Home Animals Dog Kennel Plans

Dog Kennel Plans

by Ovidiu

 

This step by step diy woodworking project is about dog kennel plans. If you want to build a simple backyard kennel for your dogs, but you haven’t found the right plans and instructions for your needs, we recommend you to pay attention to this article. There are many things that you should take into account before starting the actual constructions and assembly, so we recommend you to plan everything from the very beginning.

There are many shapes and designs that you could choose from, so make sure you make the right adjustments to this project, as to suit your needs. In addition, we recommend you to invest in high quality materials and to use the right tools for the job. Don’t forget to ask a skilled friend to assist you during the project, as two pairs of hands are always better than one. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

Cut & Shopping Lists

  • A – 2 pieces of 4×4 lumber – 80″ long, 2 pieces – 77″ long, 2 pieces – 74″ long POSTS
  • B – 4 pieces of 2×4 lumber – 72″ long SUPPORTS
  • C – 4 piece of 2×4 lumber – 60” long SUPPORTS
  • D – 22 pieces of 2×4 lumber – 60″ long FLOOR
  • E – 2 pieces of 3/4″ plywood – 48″x96″, 50 sq ft of roofing felt and shingles ROOFING
  • F – 1 piece of 2×2 lumber – 53 3/4″ long, 1 piece – 51 1/4″ long, 2 pieces – 30 3/4″ long, DOOR

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Dog Kennel Plans

Building-a-dog-kennel

Building-a-dog-kennel

 

Top Tip: Adjust the size of the dog kennel to suit your needs and invest in weather-resistant materials, such as: pressure-treated lumber, cedar, pine or redwood.

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a dog kennel

Building-the-posts

Building-the-posts

The first step of the woodworking project is to build the posts that will support the dog kennel. As you can easily notice in the image, we recommend you to use 4×4 lumber.

Cut the top of the posts at 10 degrees or at any other angle that will drain the water properly. Cut 1 1/2″ notches inside the posts with a circular saw to fit the supports. Clean the recess with a chisel and sandpaper.

Fitting the supports

Fitting the supports

Continue the project by attaching the 2×4 supports to the posts, as shown in the image. It is essential to align the components at both ends and to check if the corners are right-angled, by using a carpentry square.

Proceed in the same manner with the opposite side of the dog kennel, if you want to get the job done in a professional manner. Drill pilot holes through the supports before inserting the screws into the posts.

Attaching-the-braces

Attaching-the-braces

In order to create a sturdy and rigid structure, we recommend you to lock the sides of the dog kennel together with 2×4 braces, as shown in the plans. Cut the supports at the right size and attach them into place with galvanized screws.

Top Tip: Place a spirit level on top of the supports to check if they are perfectly horizontal. Drill pocket holes before inserting the 2 1/2″ screws. In addition, plumb the sides of the dog kennel with a spirit level.

Attaching the flooring slats

Attaching the flooring slats

Fitting the flooring into place is a straight-forward job, but there are a few things that you should pay attention to. For example, we recommend you to use 2×4 boards, as they are sturdy enough to support the weight of the dogs properly.

Top Tip: However, we recommend you to adjust their size at the right dimension and to place a nail between them, in order to make sure the water will drain properly.

Fitting-the-rafters-to-dog-kennel

Fitting-the-rafters-to-dog-kennel

Continue the backyard project by attaching the rafters on top of the posts, as you can notice in the plans. Cut the 2×4 slats at the right size and lock them into place with galvanized screws.

Building the door

Building the door

Maybe one of the most challenging part of the project is to build the door for the dog kennel. In order to get the job done in a professional manner, we recommend you to use 2×2 lumber, several hinges and chicken wire.

Top Tip: After assembling the frame of the door we recommend you fit it inside the opening and to lock it into place with hinges. Don’t forget to fit a proper latch, as to keep the door closed.

Attaching the roof sheets

Attaching the roof sheets

Cut the pieces of plywood at the right size and lock them into place with finishing nails. Align the sheets at both ends and make sure you don’t leave any gaps between them .

Top Tip: This step of the project is essential for the end result, so make sure you plan every step with great care and use proper tools to get the job done. Make sure you insert stainless steel or galvanized screws/finishing nails.

Attaching the roofing

Attaching the roofing

One of the last steps of the project is to install the roofing felt and the asphalt shingles into place. Make sure the strips of underlayment overlap at least 2″, otherwise they won’t protect the roof against moisture.

Dog kennel plans

Dog kennel plans

After assembling the dog kennel we recommend you to check if the components are locked together properly. Insert the galvanized screws properly, making sure they are at the same level with the wooden surface.

Top Tip: Don’t forget to cover the exterior of the kennel with wire and to lock it into place properly. Check if the door opens properly and tou should move your pets to their new home.

 

 

This woodworking project was about dog kennel plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment