Home Animals Dog House Plans with Porch

Dog House Plans with Porch

by Ovidiu

 

This step by step diy project is about free dog house plans with porch. I have designed this dog house with a front porch so you can shelter your large dog and offer it comfort. A wooden dog house will create shade during the hot summer days for your pet. Therefore, you can add insulation to the walls and roof of the dog house with minimal modifications. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Premium Plans available for this project in the Shop.

You should know that these free plans come with 3D diagrams, step by step instructions and a complete Cut + Shopping list. Moreover, you can print the plans with a few clicks and also download them as a PDF to your computer. The plans are for personal use only!

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

Projects made from these plans

How-to-build-a-dog-house-with-porch

Add-image

 

Dog House Plans with Porch

Building-a-dog-house-with-porch

Building-a-dog-house-with-porch

 

Cut / Shopping Lists

  • A – 2 pieces of 2×4 lumber – 96″ long, 6 pieces – 45″ long FLOOR FRAME
  • B – 17 pieces of 1×6 lumber – 48″ long FLOOR
  • C – 2 pieces of 2×4 lumber – 36″ long, 3 pieces – 28″ long 2xSIDE WALL
  • D – 2 pieces of 2×4 lumber – 41″ long, 3 pieces – 28″ long BACK WALL
  • E – 1 piece of 2×4 lumber – 41″ long, 1 piece – 29 1/2″ long, 2 pieces – 28″ long, 1 piece – 23 1/2″ long FRONT WALL
  • F – 2 pieces of 2×4 lumber – 8 1/2″ long, 1 piece – 48″ long TOP RIDGE
  • F – 2 pieces of 1/2″ plywood – 36″x43 1/2″ long, 1 piece – 32 3/4″x48″ long, 1 piece – 42 1/2″x48″ long EXTERIOR PANELS
  • G – 2 pieces of 4×4 lumber – 29 1/2″ long, 1 piece of 2×4 lumber – 36″ long PORCH SUPPORTS
  • H – 3 pieces of 2×4 lumber – 40″ long, 3 pieces – 65″ long RAFTERS
  • I – 1 piece of 1/2″ plywood – 41 1/2″x52″ long, 1 piece – 17″x52″ long, 1 piece – 48″x52″ long ROOF SHEETS
  • J – 65 sq ft of tar paper, 65 sq ft of asphalt shingles ROOFING
  • K – 2 pieces of 1×4 lumber – 52″ long, 2 pieces – 42 1/2″ long, 2 pieces – 65 3/4″ long  ROOF TRIMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One weekend

Related

 

 

It’s that simple to build a dog house!

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

Step 1: Building the floor for the Dog House with porch

Floor-frame-dog-house

Floor-frame-dog-house

The first step of the project is to build the floor frame for the dog house. Use 2×4 lumber for the components and lay them on a level floor. Drill pilot holes through the rim joists and insert 3 1/2″ screws into the perpendicular components. Remember to check if the corners are right angled and align the edges flush.

Fitting the floor slats

Fitting the floor slats

The next step is to attach the 1×6 boards to the floor frame. Align the slats with attention and place a 3/16″ spacer between them to create even gaps. Drill pilot holes and insert 1 5/8″ screws to lock them into place tightly.

 

Step 2: Building the wall frames

side-wall-frame

side-wall-frame

Next, use 2×4 lumber for the wall frames. Cut all the components at the dimensions shown in the diagram. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs. Place the studs equally spaced and make sure the corners are square.

Back-wall-frame-dog-house

Back-wall-frame-dog-house

Build the back wall for the dog house, using the same techniques described above.

Front-wall-frame

Front-wall-frame

Last but not least, build the front wall. You can adjust the door opening to suit the size of the dog.

Assembling the frame of the dog house

Assembling the frame of the dog house

After building the 4 frames for the dog house, you have to fit them to the floor and secure them into place with 3 1/2″ screws. Align the edges and check if the corners are square. Insert the screws thorough the bottom plates into the floor and also secure the adjacent wall frames.

 

Step 3: Building the roof for the porch dog house

Fitting the top ridge to the dog house

Fitting the top ridge to the dog house

Continue the project by attaching the top ridge to the dog house, as shown in the plans. Drill pocket holes at both ends of the supports and insert 2 1/2″ screws at both ends. Make sure the corners are square and attach the ridge beam.

Building-the-rafters-for-the-dog-house

Building-the-rafters-for-the-dog-house

We will be using 2×4 lumber for the dog house rafters. You need a circular saw to make the cuts to the rafters, as shown in the diagram.

Fitting the dog house rafters

Fitting the dog house rafters

Fit the rafters to the top of the dog house, making sure you space them equally. In addition, align the edges at both ends and then drill pilot holes. Insert 2 1/2″ screws to secure the rafters into place tightly.

Front and back wall panels for the dog house

Front and back wall panels for the dog house

Use 1/2″ plywood for the exterior walls. Mark the cut lines on the panels and then get the job done with a circular saw.

Fitting the front and back panels to the dog house

Fitting the front and back panels to the dog house

Fit the panels to the front and back of the dog house. Align the edges and insert 1 5/8″ screws to secure the panels into place tightly.

Side panels to the dog house

Side panels to the dog house

Additionally, cut the panels for the sides of the dog house. Attach the panels to the sides of the dog house and insert 1 5/8″ screws to lock them into place.

Supports for the front porch

Supports for the front porch

This woodworking project requires 4×4 lumber for the porch supports and 2×4 lumber for the top support. Drill pilot holes and assemble everything with 3 1/2″ screws. Make sure the corners are square and align the edges flush.

Porch-rafters-porch-dog-house

Porch-rafters-porch-dog-house

You need 2×4 lumber for the porch rafters. Make the cuts at both ends of the rafters, as shown in the diagram.

Fitting the porch rafters - Dog house plans

Fitting the porch rafters – Dog house plans

Continue by fitting the rafters to the dog house porch, as shown in the diagram. Drill pilot holes and insert 2 1/2″ screws to lock the rafters into place.

Fitting the roof sheets

Fitting the roof sheets

Next, use 1/2″ plywood for the roof sheets. Cut the sheets at the dimensions shown in the cut list and attach them to the top of the dog house. Center the sheets to the roof of the dog house. Insert 1 5/8″ screws to secure the sheets into place, every 8″ along the framing.

 

Step 4: Finishing touches

Roof trims - dog house

Roof trims – dog house

1×4 lumber is required for the front and back trims. Align the edges and insert 2″ nails to secure them into place.

Fitting the side roof trims

Fitting the side roof trims

Also, use 1×4 lumber for the side trims. Make the angle cuts to the trims and then attach them into place with 2″ nails.

Fitting the roofing

Fitting the roofing

Fit the tar paper to the roof. Attach the asphalt shingles to the roof. Read the manufacturer’s instructions to install the shingles properly.

Dog house plans

Dog house plans

Apply a few coats of paint over the exterior of the dog house to enhance the look of the project and to enhance its durability. Fit 1×2 trims to the corners of the dog house. Align the edges and insert 2″ nails to lock them into place.

Dog house with porch plans

Dog house with porch plans

 

Dog house plans with porch

Dog house plans with porch

This is a simple project you should be able to build in a few days without much effort. You can adjust the size of your dog house to suit your dog. Make sure you take a look over the rest of my dog house plans.  I have tons of designs you can choose from. Premium Plans available for this project in the Shop.

If you want to get PREMIUM PLANS for this project, in a PDF format, please press GET PDF PLANS button bellow. Thank you for the support.

 

 

This woodworking project was about dog house plans with porch. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

3 comments

Danny Mitchell -

Do you have a more detailed materials list for this project? I find it very confusing. For example, you list a 4×4 piece of lumber in the cut list, but don’t include it in the materials list.

Thank you

Reply
Nancy -

Porch supports are the 4x4s.

Great plans. Going to use this for a project we’re starting this week. Thanks so much

Reply
Terri Thornton -

Is there a larger taller version of this plan? Love the dog house but needs to be bigger for 2 dogs
4ft wide x4ft deep& at shortest back 36″ front 48″ high. Has anyone built one like this? I need assistance, myself and grandson will build it. I’m 64 and he’s 22 but handicapped. Would appreciate plans for a larger version.

Reply

Leave a Comment