Home 8x10 8×10 Chicken Coop Run Plans

8×10 Chicken Coop Run Plans

by Ovidiu

 

This step by step diy project is about large chicken coop nesting boxes plans. This is PART 4 of the large chicken coop plans, where I show you how to build the 8×10 chicken coop run. In case you haven’t already done it, you need to check PART 1, PART 2 and PART 3 of the project so you can build the coop shed and the nesting boxes. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

8×10 Chicken Coop Run Plans

Building-a-8x10-chicken-run

Building-a-8×10-chicken-run

 

Cut & Shopping Lists

  • A – 2 pieces of 4×4 lumber – 120″ long, 2 pieces – 96″ long SKIDS
  • B – 2 pieces of 2×4 lumber – 120″ long, 6 pieces – 81″ long BACK WALL
  • C – 2 pieces of 2×4 lumber – 89″ long, 5 pieces – 81″ long 2xSIDE WALL
  • D – 2 pieces of 2×4 lumber – 120″ long, 7 pieces – 81″ long FRONT WALL
  • E – 2 pieces of 2×4 lumber – 18 1/2″ long, 1 piece – 120″ long TOP RIDGE
  • F – 12 pieces of 2×2 lumber – 52 1/4″ long RAFTERS
  • G – 5 pieces of 1×2 lumber – 120″ long, 2 pieces – 96″ long, 18 pieces – 81″ long, 12 pieces – 52 1/4″ long, 2 pieces – 48 1/4″ long, 1 piece – 22″ long TRIMS
  • H – 2 pieces of 2×2 lumber – 78″ long, 2 pieces – 32″ long, 1 piece – 29″ long, 2 pieces of 1×2 lumber – 78″ long, 2 pieces – 32″ long, 1 piece – 29″ long DOOR

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets the latest plans and for some other exclusive content. Also, follow me on Pinterest and Instagram to get many ideas for your backyard from all the internet! Check out my YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a 8×10 chicken coop run

Building the skids

Building the skids

The first step of the project is to build the skids for the base. Make notches to both ends of the skids, as shown in the diagram. Use a circular saw to make 1 3/4″ parallel cuts to beams and then remove the excess with a chisel. Smooth the edges with sandpaper for a professional result.

Assembling the base

Assembling the base

Level the surface for the chicken coop run and then lay the beam, as shown in the diagram. Drill pilot holes and insert 3 1/2″ screws, so you can lock the skids together tightly. Make sure the corners are square and then lock them into the ground with 2×3 stakes.

Right-side-wall-frame

Right-side-wall-frame

Continue the project by framing the right side wall for the chicken coop run. Cut all the components from 2×4 lumber. Drill pilot holes through the rim joists and insert 3 1/2″ screws into the studs.

Left-side-wall-frame

Left-side-wall-frame

Build the opposite side wall for the coop run in the same manner described above. Drill pilot holes and lock everything with 3 1/2″ screws. Place the studs every 24″ on center, as shown in the diagram.

Front-wall-frame

Front-wall-frame

Next, you have to frame the front wall for the chicken coop run. You need to leave enough space of the door opening. You can adjust the size of the door opening to suit your needs.

Back-wall-frame

Back-wall-frame

Build the back wall from 2×4 lumber and using the techniques described above.

Assembling the frame of the coop run

Assembling the frame of the coop run

After building the wall frames you need to attach them into place tightly. Drill pilot holes through the walls and secure them to the skids with 2 1/2″ screws. Moreover, you need to lock the adjacent walls together tightly using 2 1/2″ screws. Make sure the walls are plumb before inserting the screws.

Building the rafters

Building the rafters

Build the rafters for the chicken coop run from 2×2 lumber. Make miter cuts to both ends of the rafters, as shown in the diagram.

Fitting the top ridge

Fitting the top ridge

Fit the top ridge to the frame of the coop run. Drill pocket holes at both ends of the supports and secure them into place with 2 1/2″ screws. Plumb the supports with a spirit level and make sure the corners are square. Fit the top ridge into place and make sure the corners are square. Insert the 2 1/2″ screws.

Fitting the rafters

Fitting the rafters

Fit the rafters to the top of the coop run. Drill pilot holes and insert 2 1/2″ screws to secure the rafters into place tightly.

Back wall - Trims

Back wall – Trims

Fit chicken wire mesh to the exterior of the walls and staple it into place tightly, after stretching it properly. Next, fit the 1×2 trims along the framing, as show in the diagram. Drill pilot holes and insert 1 5/8″ screws so you can lock the trims into place tightly.

Front wall - Trims

Front wall – Trims

Fit the trims to the opposite side of the chicken coop run. Align the edges flush for a professional result.

Side trims

Side trims

Fit the trims to the side of the chicken coop run.

Roof trims

Roof trims

Last but not least, you need to fit the trims to the top of the coop run. Cut the trims at the right dimensions and then secure them along the rafters with 1 5/8″ screws.

Door trims

Door trims

Build the frame of the door from 2×2 lumber. Drill pilot holes and insert 2 1/2″ screws to assemble the frame of the door tightly.

Building the door

Building the door

Staple the chicken wire mesh to the door frame and then secure it into place with 1×2 trims. Drill pilot holes and insert 1 5/8″ screws to secure the trims along the door, every 8″/

Fitting the door

Fitting the door

Fit the door to the front opening and then secure it to the jambs with hinges. Install a small latch so you can keep the door locked. Moreover, you should secure the coop run to the shed using screws.

Large chicken coop plans

Large chicken coop plans

Last but not least, you need to take a look over the rest of the larg coop project. In PART 1 and PART 2 of the project you will learn how to build this large 8×10 chicken coop from the ground to the top. In PART 3 I show you how to build the nesting boxes.

 

 

This woodworking project was about 8×10 chicken coop run plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

5 comments

Kim -

I am a novice woodworker but your plans seem so well written that I think I may be able to give this a try. I am trying to wrap my head around the materials list- it appears you have a materials list below with the cut lists above. But I can’t figure out how.where the 32- 1 x 4 x 8′ pieces are being used

Reply
Ovidiu -

There was an error. I’ve updated the cut list.

Reply
Kimberly -

Thank you very much. Fingers crossed I can get it right

Reply
DEBRA SCHONK -

I would like to purchase the Large chicken coop run plans (the 8′ x10′) Red in your pictures but all I can find is a smaller coop/run pair in your premium plans. Can you help guide me to the right place for a clean printable PDF set of plans?
Kind regards,Debra

Reply
Ovidiu -

There are no premium plans for that yet. You can still download the free version: https://myoutdoorplans.com/faq/

Reply

Leave a Reply to Kim Cancel Reply