Home 5x5 5×5 Shooting House Plans

5×5 Shooting House Plans

by Ovidiu

 

This step by step diy project is about 5×5 shooting house plans. I have designed this deer stand as an alternative to my already 4×4 box project I had on the site. This deer shooting house is very sturdy and it features blinds on all sides and a door. The roof has a lean to shape, so it is super easy to build. You can even get the job done with hand tools! Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

5×5 Shooting House Plans

Building-a-5x5-shooting-house

Building-a-5×5-shooting-house

 

Cut & Shopping Lists

  • A – 2 pieces of 2×4 lumber – 60″ long, 5 pieces – 57″ long FLOOR FRAME
  • B – 1 piece of 3/4″ plywood – 48″x60″ long, 1 piece – 12″x60″ long FLOOR
  • C – 2 pieces of 2×2 lumber – 60″ long, 5 pieces – 65 1/4″ long, 2 pieces – 18 1/4″ long, 1 piece – 30 1/4″ long, 1 piece – 13 1/4″ long BACK WALL
  • C – 2 pieces of 2×4 lumber – 57″ long, 2 pieces – 65 1/4″ long, 2 pieces – 54″ long, 2 pieces – 37″ long, 2 pieces – 13 1/4″ long 2xSIDE WALL SIDE WALLS
  • D – 2 pieces of 2×2 lumber – 60″ long, 4 pieces – 81″ long, 2 pieces – 50″ long, 2 pieces – 29″ long, 2 pieces – 37″ long FRONT WALL
  • F – 4 pieces of 2×2 lumber – 72″ long RAFTERS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a 5×5 deer blind

Building-the-floor-frame

Building-the-floor-frame

The first step of the the 5×5 shooting house is to build the floor frame. Cut the joists at the right dimensions and then lay them on a level surface. Drill pilot holes through the rim joists and insert 3 1/2″ screws into the perpendicular components. Align the edges flush and make sure the corners are square.

Floor

Floor

Next, you have to attach the 3/4″ plywood floor to the frame. Cut the sheets at the right dimensions and then fit the to the frame, making sure you align the edges flush. Drill pilot holes and insert 1 5/8″ screws, every 8″ along the framing.

Side-wall-frame

Side-wall-frame

Continue the project by assembling the frames for the side walls. Cut the components from 2×2 lumber at the right dimensions. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs. Drill pilot holes through the end studs and insert 2 1/2″ screws into the horizontal supports.

Back-wall-frame

Back-wall-frame

Build the back wall frame for the shooting house from 2×2 lumber, as well. Drill the pilot holes and insert 2 1/2″ screws into lock the components together tightly. Make sure the corners are square and align the edges flush.

Back-wall-frame

Back-wall-frame

Build the front wall for the shed from 2×2 lumber, using the same techniques described above.

Building the frame of the shooting house

Building the frame of the shooting house

Fit the wall frames to the floor of the deer house. Align the edges flush and plumb the with a spirit level. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. Moreover, you need to lock the adjacent walls together tightly, by drilling holes and inserting 2 1/2″ screws.

Fitting the rafters

Fitting the rafters

Fit the 2×2 rafters to the top of the deer blind. Place the rafters equally spaced and then drill pilot holes. Insert 2 1/2″ screws so you lock the rafters into place tightly.

5x5 Deer Blind Plans - Front view

5×5 Deer Blind Plans – Front view

You really need to take a look over PART 2 of the 5×5 deer box plans, so you learn how to attach the exterior wall, the roofing sheets and the door.

5x5 Deer Blind Plans - Back View

5×5 Deer Blind Plans – Back View

This 5×5 deer stand has a sturdy structure, but lightweight and cheap enough so anyone can get the job done in a weekend. This deer stand provides enough space so you can shoot in comfort. If you want to get the Premium Plans, see the GET PDF PLANS button bellow.

 

 

This woodworking project was about 5×5 deer blind plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

12 comments

kevin -

how do I download the 5×5 shooting house plans

Reply
Ovidiu -

Please read the FAQs at: http://myoutdoorplans.com/faq/

Reply
Luis.b -

Why is the 5×5 built with 2×2’s instead of 2×4’s?

Reply
Ovidiu -

I’ve experimented to keep the structure light. My other deer stands are built from 2x4s.

Reply
Pwr -

Thanks for the great plans! Is the materials list correct? It says to purchase 32 2x4s. The instructions suggest the framing is with 2x2s. Also, is the ‘cut’ list (for lack of a better name) correct? The cut list says the side walls are made with 2x4s but the instructions state 2x2s. Thanks again.

Reply
Ovidiu -

I’ve updated the list. Thank you.

Reply
Richard W Suggs -

please send me a copy of your 5×5 shooting house plans and material list, I like your plans a lot

Reply
Ovidiu -

You can get the plans with a few clicks. Please read the FAQs: https://myoutdoorplans.com/faq/

Reply
Jim Harbaugh -

Thanks for the plans!

Do any of your plans include more detailed steps on how to install the windows?

Reply
Ovidiu -

No.

Reply
Craig -

How does the roof hold up with the 2×2 rafters? I would hate to have the whole thing collapse with heavy snow.

Reply
Amy Ingli -

I can’t find the 5×5 shooting house plans. Where can I find them to purchase?

Reply

Leave a Reply to Luis.b Cancel Reply