Home 10x12 10×12 Field Shelter Plans

10×12 Field Shelter Plans

by Ovidiu

 

This step by step diy project is about field shelter plans. I have designed this basic animal shelter, so you create a shaded area for the horses, goats or sheep, when on the field. This shelter has a gable roof so it can drain the water easily and make the surface waterproof. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

10×12 Field Shelter Plans

Building-a-10x12-field-shed

Building-a-10×12-field-shed

 

Cut & Shopping Lists

  • A – 2 pieces of 2×4 lumber – 120″ long, 8 pieces – 91 1/2″ long, 1 piece – 113″ long 2xSIDE WALL
  • B – 2 pieces of 2×4 lumber – 137″ long, 1 pieces – 144″ long, 7 pieces – 91 1/2″ long BACK WALL
  • C – 2 pieces of 2×4 lumber – 137″ long, 1 pieces – 144″ long, 4 pieces – 91 1/2″ long, 2 pieces – 86″ long, 2 pieces of 2×6 lumber – 99″ long FRONT WALL
  • D – 2 pieces of 2×4 lumber – 144″ long SKIDS
  • E – 5 pieces of T1-11 siding – 48″x96″ long, 1 piece – 8 1/2″48″ long, 4 pieces – 24″x94 1/2″ long, 2 pieces – 24″x94 1/2″ long WALLS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Timr

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets the latest plans and for some other exclusive content. Also, follow me on Pinterest and Instagram to get many ideas for your backyard from all the internet! Check out my YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a 10×12 field shelter

Back-wall-frame

Back-wall-frame

The first step of the project is to build the back wall for the field shelter. Cut the components from 2×4 lumber at the right dimensions. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs every 24″ on center for a professional result. Make sure the edges are flush and check if the corners are square.

Front-wall-frame

Front-wall-frame

Next, build the front wall frame for the animal shelter. As you can easily see in the diagram, you need to leave a 8′ wide opening, for an easy access. Use 2×6 lumber and 1/2″ plywood for the double header. Use the same techniques to assemble the wall frame, as described above.

Building-the-side-wall-frames

Building-the-side-wall-frames

Build the side walls for the shelter. Place double studs at both ends of the walls for an added rigidity.

Assembling the frame of the shed

Assembling the frame of the shed

Assemble the frame of the shelter. Plumb the walls and align the edges flush. Drill pilot holes and insert 2 1/2″ screws to lock the adjacent walls together tightly.

Building the skids

Building the skids

Use 4×4 lumber for the skids. Make 45 degree cuts to both ends of the beams.

Fitting the skids

Fitting the skids

Place the skids under the front and the back walls for the shelter. Drill pilot holes through the plates and insert 3 1/2″ screws into skids. The skids will make moving the shelter from one location to another, very easily.

Back wall

Back wall

Attach the T1-11 siding sheets to the back wall of the shelter. Align the edges flush and insert 6-8d nails, every 8″ along the framing. Leave no gaps between the sheets for a professional result.

Side walls

Side walls

Fit the sheets to the sides of the shelter, as well. Place the sheets 1 1/2″ under the top plate. Use 6-8d nails, every 8″ along the framing.

Front wall

Front wall

Fit the T1-11 siding sheets to the front of the shelter. Make cuts so you can fit the sheets around the opening. Insert 6-8d nails, every 8″ along the framing, so you can lock the sheets into place tightly.

Field Shelter Plans

Field Shelter Plans

This field shelter is ideal if you have animal and you want to provide them a shaded area. Take a look over PART 2 of the project, so you learn how to frame the gable roof for the shed.

 

 

This woodworking project was about field shelter plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

Stephanie -

The plans
http://myoutdoorplans.com/animals/10×12-field-shelter-plans/
it mentions 1/2″ plywood – but not the quantity and size
Please advise

Reply
Ovidiu -

One sheet should be more than enough. The 1/2″ plywood is for the double header.

Reply

Leave a Reply to Stephanie Cancel Reply